siright.blogg.se - Brookstone weather watcher

#Brookstone weather watcher how to
#Brookstone weather watcher software

Note: Plugging the main unit back to power straight away will prevent it from power cycling. If that does happen, go back to Solution #1 and re-sync the main unit with the transmitter. Unplugging the main unit could cause its sync with the transmitter to fail.

Re-attach the power cable onto the back panel and then the power source.

Wait for 5 minutes, while the main unit is discharging.Unplug the power adapter from both ends.Locate the power adapter going on the back of the unit.Take the main unit off the wall (if it’s mounted).

#Brookstone weather watcher software

It’s a quick process that has the goal of completely discharging your main unit from power, to refresh the hardware and software of the device.

In order to power cycle a device, you must cut off its power supply.

Since your Brookstone Weather Station main unit uses a power adapter, unlike the transmitter that runs on batteries, you’re able to Power Cycle the device to address any faults. Alert: Placing the transmitter away from the main unit before syncing, will fail the process. You’ll know that the syncing has gone through if the main unit of your weather station starts displaying information on the screen.

Press and hold the Sync button for 3 seconds (the LED next to the button will blink).

Locate the “ Sync” button on the back of the main unit.

Place the transmitter next to the main unit.

Keep in mind that for syncing, both devices must be next to each other!įollow these instructions to re-sync the Brookstone main unit to the transmitter:.

It’s a built-in feature of the main unit to automatically signal the wireless signal of the transmitter when the “Sync” button on the device is pressed.

If either your transmitter or main unit is failing to display information, it’s possible that the syncing between the devices has failed. Let’s not waste anymore time and jump into the guide! Solution #1 Re-Sync the Main Unit to the Transmitter We’ll discuss 6 methods to target problems with your Brookstone Weather Station and resolve them as easily as possible, completely on your own.

#Brookstone weather watcher how to

Keep reading to learn how to fix it! How to Fix When Brookstone Weather Station Not Working?Īfter learning what could go wrong with your Brookstone Weather Station, it’s time to get into troubleshooting. We hope that you’ve been able to acquire a general idea of where problems could occur in your Brookstone Wireless Weather Forecaster setup. A Hardware Fault with the Main Unit/Transmitter.Distance-Related Issues in the Weather Station Setup.Battery Fault with the Transmitter Device.A Syncing Problem Between the Two Devices.Let’s learn more about the potential problems that could occur with the setup: If anything goes wrong in the setup of these two devices, your Brookstone Weather Station will refuse to work. The main unit is responsible for displaying the weather information (forecast) that the transmitter detects and tells to you. Your Brookstone Weather Station consists of two separate devices – the transmitter (the device you place outside to detect temperature) and the main unit. Keep reading to find out more about this issue’s occurrence and why is it happening! Brookstone Ambient Weather Forecaster Not Working – Why? After that, replace the units inside of the transmitter, plug the main unit into another source and replace the A/C. To fix when Brookstone Weather Station isn’t working, Power Cycle the main unit along with the transmitter and place the device closer to one another. We’ve gathered the most useful user opinions from Brookstone discussion forums at your disposal to help you solve the problem you’re experiencing! There are multiple ways to address issues with your Brookstone Weather Station and in this guide, we’ll review them all.

If your Brookstone Weather Station not working, we’ve got you covered!